Improved workflow. Increased mobility. It all starts with wireless transducers.
Superior Image Quality

• Synthetic focusing provides clarity throughout the entire field of view without requiring the user to set focal zones in advance
• Advanced Spatial Compounding and Speckle Filters provide excellent detail and contrast resolution for improved target and needle visualization during ultrasound-guided procedures
• 8 GHz ultra-wideband (UWB) high data rate radio provides exceptional real-time wireless imaging
• Multiple antennas on the transducer and system dedicated to reliable high speed image data transmission

Simpler, More Efficient Workflow

• Built-in transducer controls allow easy access to real-time operating functions
• Lightweight, ergonomic transducers are easy to prepare for sterile procedures
• Simplified user interface with fast access to most commonly used controls
• Wireless or wired DICOM connectivity
• Helps reduce the risk of contaminating the sterile field during an ultrasound-guided procedure

Easier, More Flexible Scanning

• Greater flexibility in positioning the system and the transducer because there is no cable tethering them together
• Freedom from cable weight or torque allows for greater ease in obtaining accurate transducer and needle positioning during point-of-care procedures

Improved Mobility and Control

• Quick boot up and shut down in less than 30 seconds
• System can operate on battery power, streamlining set-up at the patient bedside
• Wireless alert system helps keep track of transducer location
• Compact console design requires minimal space in patient room or procedure room

System Specifications

• System Height: 335 mm (13.2 in)
• Width: 373mm (14.7 in)
• Depth: 121 mm (4.8 in)
• Weight: 4.8 kg (10.5 lbs)

System Console

• Small footprint mobile roll stand, table top mountable, or zero footprint wall mountable
• Compact and lightweight module with high-resolution display and streamlined user interface
• AC or internal battery power
• Integrated dual transducer battery chargers

Monitor

• Adjustable brightness
• 15 inch (38.1 cm) high-bright LED LCD
• Resolution: 1024 x 768 pixels
• Energy saving display power management
• High contrast ratio
• Wide viewing angles

Imaging Modes

• B-Mode (2D)
• Color Flow Doppler Velocity Mode
• Color Flow Doppler Power Mode

Control Mechanisms

• Intuitive and flexible user interface control mechanisms
• Real-time scanning controls accessible
• System console: dual rotary controls, side panel soft keys, trackball and trackball keys
• Transducer slider and soft keys
• Compatible external USB mouse
• System console
• Lower panel soft keys
• Setup
• Patient (New Patient)
• Measure
• View
• Side panel soft keys
• B-mode and Color Flow Controls
• Selection
• On/off toggle for select functions
• Dual rotary controls
• B-mode and Color Flow controls:
• Selection
• On/off toggle for select functions
• Value adjustment for all controls
• Transducer slider and soft keys
• B-mode and Color Flow controls
• Selection
• On/off toggle for select functions
• Value adjustment for all controls

Wireless Imaging

• Lossless digital image data high speed
• wireless transmission using a proprietary 7.8 GHz ultrawideband radio
• 500 MHz minimum bandwidth
• Scanning distance from transducer to system console: Up to 3 meters
• Multiple antennas in the transducers and system console combined with proprietary high speed antenna switching system provide optimal wireless link
• Wireless signal quality meter provides real-time feedback
• Average Noise Level display provides real-time quantified measure of wireless imaging signal quality
• Back channel Bluetooth® radio used for bidirectional control data communication

Hard Drive

• 16 GB solid state flash memory
• Approximately 100,000 image frames

System Input/Output

• Input/Output- Transducer cable adapter
• Ethernet RJ45 (10 Base T/100 Base T)
• (2) USB-A
• Output
• VGA (15 pin D-sub miniature) 1024 x 768, 60 Hz

Power Supply

• Voltage: 100 – 240 V (50/60 Hz)
• Power consumption: maximum 0.08 kVA (may vary with configuration)
• Atmospheric pressure range: 700 — 1060 hPa (525 —795 mmHg) or up to 3050 m (10,000 ft)
• Ambient operating temperature range: +10“ to +40”C (50° to 104F)
• Humidity operating: 10 — 75%, non-condensing
• Maximum heat output: 273 BTU/hr

Image File Formats

• Export to USB-compatible storage media; PC-readable JPEG, MOV and XML (patient information)

Digital Patient Study Storage, Archiving, and Documentation Device

• Digital storage of still frames and clips
• Onboard patient study list
• Study viewing capability
• Viewing formats, full screen, quad screen, twelve imaging screen
• Optional Video Printer- B/W Printer (Sony UP 897)

System Applications & Reporting

• Abdomen
• General Imaging
• MSK
• Nerve
• OB/GYN
• Small Parts
• Vascular

Pain Management Imaging

• Musculoskeletal (MSK)
• Nerve

Women’s Imaging

• Breast Imaging
• Gynecology
• Obstetrics

Small Parts

• Breast
• Deep
• General
• Superficial
• Thyroid

Vascular Imaging

• Arterial
• Carotid
• General
• Venous Difficult
• Venous Lower Extremity
• Venous Superficial
• Venous Upper Extremity

DICOM

• DICOM-compatible system providing PACS connectivity
• DICOM Storage Class
• DICOM Storage Commitment
• DICOM Modality
• DICOM Echo
• Connectivity over Ethernet
• Storage over USB compatible storage media
• Wired Ethernet networking
• IEEE 802.11 b/g wireless networking (Wi-Fi)

Transducers

• Miniaturized ultrasound front-end and digital signal processing subsystem with high data rate ultra-wideband radio
• Cordless operation with adapter cable option
• Lightweight, ergonomic design
• Flat transducer base allows transducer to stand on end for single operator transducer cover placement

Wireless Transducer Technologies

• Multiple antennas integrated in transducers foroptimal data link quality
• Transducer remote control soft keys: slider and two oftkeys labeled for +/- control
• Auto-freeze automatically freezes image aftertime out period during non-scanning to conserve battery life
• Auto-unfreeze automatically unfreezes image after sensing user grasp of a transducer that has entered
• Auto-freeze
• Transducer On/Off LEDf‌index marker
• Up to 90 minutes of continuous scanning with fully charged transducer battery
• Low battery level waming messages
• Removable wireless transducer battery
• Transducer battery charger
• Dual charger integrated into system console
• Charging transducer batteries requires either of the following:
  • – System console is connected to AC main power; or
  • – System console batteries are charged
• LED indicator of charging activity on battery
• Indicator and readout of battery charge level on system console screen
• Transducer location
• Audio tone for transducer status
• Integrated Bluetooth radio aids in location tracking

Transducer Disinfection and Sterilization

• Transducer and transducer battery immersible for cleaning and disinfection
• STERRAD 100S system sterilizable

• Transducers:
• L8-3
• C5-2
• L13-5